WeMos D1 R1 WiFi Development Board

  • Description
  • Reviews (0)

Description

The D1 R1 is a mini wifi board based on ESP-8266EX.
11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0)
1 analog input(3.3V max input)
A Micro USB connection
A power jack, 9-24V power input.
Compatible with Arduino Compatible with nodemcu
Getting Started
Arduino
Getting Started
NodeMcu
Getting Started
Technical specs:
Microcontroller ESP-8266EX
Operating Voltage 3.3V
Digital I/O Pins 11
Analog Input Pins 1
Clock Speed 80MHz/160MHz
FLash 4M bytes
Length 68.6mm
Width 53.4mm
Weight 25g
Pin Function ESP-8266 Pin
TX TXD TXD
RX RDX RDX
A0 Analog input, max 3.3V input A0
D0 IO GPIO16
D1 IO, SCL GPIO5
D2 IO, SDA GPIO4
D3 IO, Pull-up GPIO0
D4 IO, pull-up, BUILTIN_LED GPIO2
D5 IO, SCK GPIO14
D6 IO, MISO GPIO12
D7 IO, MOSI GPIO13
D8 IO, pull-down, SS GPIO15
G Ground GND
5V 5V –
3V3 3.3V 3.3V
RST Reset RST
*All IO have interrupt/PWM/I2C/one-wire supported(except D0)
Programming:
The D1 R1 has a micro USB for auto programming.
Also, you can be programming it using OTA
Warnings:
All IO is work at 3.3V.
Package included:
1 x WeMos D1 R1 WiFi ESP8266 Development Board Compatible Arduino UNO Program By Arduino IDE

Reviews

There are no reviews yet.


Be the first to review “WeMos D1 R1 WiFi Development Board”